КАТАЛОГ ТОВАРОВ:

Стержневая мельница

Processing ability: 3–120 t/h

Feeding size: <=25–<=50 mm

Discharging size: 0.833–0.147 mm

Applied material: quartz, iron ore, copper ore, gold, construction waste, glass, cement clinker, etc

Overview

The Handling Materials and Function of Rod Mill:

Rod mill is mainly used for processing and crushing raw materials such as feldspar, quartz and ore, and also for the fine and medium crushing of many kinds of hard and crisp materials such as refractory matter, cement, steel grit, slag powder, copper ore, iron ore, gold ore sand, concrete aggregate and pitch aggregate.

The Performance Characteristics of Rod Mill:

The granularity of the final products is even, and the amount of the particles that are over crushed and ground is low. When used for coarse grinding, the processing amount of rod mill is higher than that of the ball mill with the same specification.

Features

The features of rod mill are that in the ore grinding process, the grinding media contact with the ore in a linear manner, so that it has selective grinding function.

Working principle

The electro motor drives the cylinder to rotate through the reduction gears and the peripheral rack wheel reducer transmission, or the low speed synchronous motor directly drives the cylinder to rotate through the peripheral rack wheel reducer transmission. Inside the cylinder, there are proper ore grinding media-steel rod. Under the eccentric force and frictional force, the ore grinding media are lifted to a certain height and fall down in the state of dropping. The materials to be ground continuously go into the cylinder from the ore feeding mouth and are crushed by the moving grinding media, and then are discharged by the overflow and the force of continuous feeding to go to the next procedure.

Technical data

Model Shell Specifications(mm) Shell rotation speed(r/min) Feeding size Discharging size(mm) Processing capacity(t/h) Power(km) Total werght(kg)
Diameter Length
MBS0918 900 1800 36-38 <=25 0.833-0.147 0.62-3.2 18.5 5500
MBS0924 900 2400 36 <=25 0.833-0.147 0.81-4.3 22 6100
MBS1224 1200 2400 36 <=25 0.833-0.147 1.1-4.9 30 12000
MBS1530 1500 3000 29.7 <=25 0.833-0.147 2.4-7.5 75 16800
MBS1830 1830 3000 25.4 <=25 0.833-0.147 4.8-11.6 130 29000
MBS2130 2100 3000 23.7 <=25 0.833-0.147 14-35 155 34800
MBS2136 2100 3600 23.7 <=25 0.833-0.147 19-43 180 37000
MBS2430 2400 3000 21 <=50 0.833-0.147 25-65 145 54000
MBS2736 2700 3600 20.7 <=50 0.833-0.147 32-86 380 86000
MBS2740 2700 4000 20.7 <=50 0.833-0.147 32-92 400 94000
MBS3245 3200 4500 18 <=50 0.833-0.147 64-180 630 137000


td align=25